Nowadays, the Internet has become an essential element for our daily lives.It is thanks to him that you can communicate quickly and effectively with your interlocutors abroad.To have internet access, you will need to use specific equipment such as box.The latter uses the telephone line, the optical fiber, the cable or the satellite to make you access the Internet.

It then broadcasts the signal thus obtained in Wi-Fi allowing you to connect your computer devices.However, the power of the Wi-Fi signal emanating from a box can sometimes be too low to meet your expectations.What is more, the network settings are limited.This is why it is interesting to place a wi-fi router behind its box to have a good signal.

Briefly, a router is a device allowing you to optimally distribute the Internet signal emitted by your box to all your connected devices.In this article, we will try to explain to you how to set up a router behind a box.We will also give you some tips allowing you to optimize your internet connection at home.

How to set up a router behind a box?

You will actually have several advantages to install a router behind your box.This device will allow you to considerably improve the scope and quality of your Wi-Fi signal.However, to take advantage of all the advantages of a router, you should know how to put it in place.In general, there are two methods to place it well.

The method for beginners

There is a very easy method to connect your router to your box.To do this, you will have to pass your box in modem mode via the parameters by activating the option "Pont bond" or "bridge".Subsequently you just have to connect your ethernet router behind the box by using an RJ45 type cable.

At this point, the router should be able to transmit the signal to Wi-Fi to all your connected devices.However, you should keep in mind that this method is quite limited.Indeed, by connecting your router in this way, you will no longer have access to the basic network of your box.You will also not be able to manage the administration settings of your Internet box.

To reread: Test: TP-Link Archer AX11000.

The more complex method

As its name suggests, this method is to be carried out by a person who has some experience in the field of the network.With this process, you can use the router of your box and add another additional access point.To start, you will need to use a brand router recognized as Asus, Netlink or Dlink for example.

You will have to make sure that the chosen router has the features you want to use.You will then have to deactivate Wi-Fi and DHCP on the box.Thereafter the router with an RJ45 cable while taking care to configure it well.You will have to choose an IP address compatible with the IP of your Internet box.You will also need to configure the LAN network so that you can connect your devices connected to your router.

How to install your router to optimize the connection?

To benefit from a good connection speed, there are a few tips that should be taken into account.First, we advise you to connect all your devices via an ethernet cable to the router if possible.When this is not possible, you can use the Wi-Fi of your router by favoring the 5 GHz frequency.

To benefit from the advantages of using a Wi-Fi router, we advise you to connect your computer devices to the router and not on the box.Otherwise, you will have no interest in using the router.If you want to connect your devices via Wi-Fi, remember to deactivate the box of the box to avoid interference.

Where to put your router to have a better connection?

The positioning of your router may have impacts on the quality of your Internet connection.In order to have a stronger signal in your house, we advise you to put your router in a central area and well released in your home.Avoid as much as possible to put it behind a piece of furniture or near another electromagnetic device such as a microwave, a TV, a Bluetooth device, etc..

To reread: how to properly place your Wi-Fi boxes in the house?

We also advise you to install it at height about 1.50 m from the ground so that the Internet signal can be propagated in an optimal way in your home.Also remember to put it far from the concrete or brick walls, because they prevent the waves (especially if it is the 5 GHz frequency) to circulate well in your interior.If necessary, you can use a WLAN repeater to extend the signal range.